Vacuum Pumps

2005G2 Vacuum Hand Pump

The 2005G2 vacuum hand pump is a convenient and easily operated vacuum pump for:

Evacuating a soil water sampler in order to obtain a sample of the soil solution.
Extracting solution samples from soil water samplers using an extraction kit.
Vacuum extraction of soil samples in buchner funnels or tempe cells

Air is pulled in at the front and exhausted through the upper side fitting located directly below the handle end of the pump. The 2005G2 has a 100 ml volume stroke capacity and is recommended for the 1900 series and 1905 slim tube soil water samplers.
Download a print version of 2005G2 Instruction Manual

2006G2 Pressure Vacuum Hand Pump

The 2006G2 hand pump is a very sturdy and rugged foot held hand pump which moves a large volume of air per stroke. The 2006G2 has a 500ml volume stroke capacity, provides up to 75 psi (500 kPa) pressure and a -90 cb or -90 kPa vacuum. Recommended for the 1920 to 1942 series soil water samplers.
Download a print version of 2006G2 Instruction Manual

2008 Electric Pressure Vacuum Pump

The 2008 provides fast, large volume vacuum capabilities, and quickly develops the needed "sample" push pressures. The electric pressure vacuum pump is battery-operated combination pump, with 2 sealed lead acid batteries for total continuous working time of 5 hrs. Comes with a number of features including readout dials for both pressure and vacuum ports, a pressure regulator output limits, and a valve for controlling speed to pressurization or vacuum creation. Quick connects on the pump console and on output connection hose assemblies provided for easy and trouble free connection.

Request Quote | Instruction Manual

2005G2 Vacuum Hand Pump, with gauge

The 2005G2 vacuum hand pump is a convenient and easily operated vacuum pump for:

Evacuating a soil water sampler in order to obtain a sample of the soil solution.
Extracting solution samples from soil water samplers using an extraction kit.
Vacuum extraction of soil samples in buchner funnels or tempe cells

The 2005G2 has a 100 ml volume stroke capacity and is recommended for the 1900 series and 1905 slim tube soil water samplers.

Air is pulled in at the front and exhausted through the upper side fitting located directly below the handle end of the pump. Not only will the pump pull a vacuum in short order, but due to the exceptional sealing of the valves, will maintain a large evacuated volume over an extended period of time. The pump Includes a vacuum dial gauge and is capable of developing vacuums to 80 kPa.

Features

Vacuums to 80 cb or 80 kPa suction
100 ml volume stroke capacity
Rugged portable design for prolonged use in the field
All parts brass, stainless steel or rugged plastics for long service
Field repairable valves and pump pads
Weighs 0.57 kg

Request Quote | Instruction Manual

2006G2 Pressure Vacuum Hand Pump

The 2006G2 vacuum hand pump is a convenient and easily operated vacuum pump for:

Evacuating larger soil water samplers in order to obtain a sample of the soil solution.
Extracting solution samples from larger soil water samplers using an extraction kit.

The 2006G2 hand pump is a very sturdy and rugged foot held hand pump which moves a large volume of air per stroke. The 2006G2 has a 500 ml volume stroke capacity and is recommended for the 1920 to 1942 series soil water samplers.

Features

Vacuums to 90 cb or 90 kPa suction
500 kPa (75 PSI) pressure
500ml volume stroke capacity
Rugged portable design for prolonged use in the field
All parts brass, stainless steel or rugged plastics for long service
Field repairable valves and pump pads
Dimensions are 55.8 cm long x 3.81 cm diameter
Weighs 2.85 kg

Includes:

Pump
0-100 cb recalibrator-style vacuum dial gauge
Fittings
Inline filter

Request Quote

2008 Motorised Electric Pressure/Vacuum Pump

The 2008 electric vacuum pump is a battery-operated combination pressure/vaccum pump. It is designed to service multiple soil water samplers at a multitude of locations.

Features:

Fast, large volume vacuum capabilities
Quickly develops the needed "sample" push pressures

The Electric Pressure Vacuum Pump includes:

Battery-operated combination pump
2 sealed lead acid batteries for total continuous working time of 5 hrs
Pressure gauge (pressure 0-100 psi; with max pressure setting)
Vacuum gauge (0-100 cbar)
Pressure regulator
Valve for controlling speed to pressurization or vacuum creation
Quick connects on the pump console and on output connection hose assemblies
Inline filter
2 stretch coil hoses each 92 cm long
Output assemblage having readout dials and control valves
Portable, splash water proof pelican carrying case
Battery charger

Specifications:

Dimensions: 47 cm x 36.5 cm x 17.8 cm
Weight: 9.07 kgs
Batteries: 12 VDC

Vacuum Pumps - Associated Products

1900K3 Soil Sample Extraction Kit The 1900K3 brings to the field the essentials for quickly removing soil solution samples from the 1900 series samplers. The 1900K3 includes a 1 liter polypropylene flask, stoppers and accessory nylon tubing for access to the bottom of 1900 samplers.
1428K Remote Tempe Kit The complete mobile setup for vacuum/pressure extraction and soil hydrology studies in a waterproof case for easy transport. Uses: Portable soils lab to get moisture retention curves for the 0 to 1 Bar range. Flow studies in a remote location without compressors or electricity. 1428K1 Includes: 1400B01M3-3 tempe vacuum pressure cell, 1 bar high flow plate, with 5.7 cm OD x 3 cm brass cylinder (5 of) 2005G2 vacuum hand pump with gauge Pressure - vacuum reservoir with 5 port inlet 1301V050 50 ml vacuum flask (5 of) Battery operated scale 500 gm (0.01g precision) 1425 specialized tempe stand (for 5 tempe's) Associated clamps, tubing and tees 1428K2 Remote Tempe Kit: Replaces the 2005G2 vacuum pump with the portable 2008 electric pressure/vacuum pump housed in its own separate carrying case Also includes 1405B02M1 tempe porous plates (5 of) - 5.6 cm diameter, 2 Bar
1300F1 Filter Funnel Extractor The 1300F1 enables extraction of the solution from 5 soil samples at the same time. Soil dilutions have been a standard of assessing dissolvable soil constituents, solution extraction of mineral contents or any number of other solvent /solution based tests commonly done on soils that will require filtered extract. Using a vacuum extraction method helps assure extraction of all the solution possible from a test sample. Whether it's working with soil pastes or slurries the 1300F1 will get it done quickly and effectively. Constructed of durable aluminium and epoxy coated, the "push – pull" control knob at each sample port give complete control of suction intensity and is unique to the 1300. Funnel tube end extends into the glass sample bottles preventing any contact bias from outside sources. Specifications: 1300F1 filter funnel extractor only: 45.7 x 15.2 x 12.7 cm Weight: 0.6 kgs Funnel interior and filter size: Option of 55 mm or 90 mm Glass sample bottles with caps: Option of 29.6 ml, 59.2 ml or 148 ml 1300F1 Extractor Sets Includes: Filter funnel extractor 1 box 100 filters 5 funnels 10 sample bottles
Soil Water Samplers (Lysimeters) 1900 Soil Water Samplers The Model 1900 soil water sampler is a large-volume sampler designed for near-surface installation at depths ranging from 15 cm to 1.8 m. The unit consists of a 4.8 cm outside diameter PVC tube, a porous ceramic cup (653X01-B02M2) with a 200 kPa (2 bar) air-entry value, and a santoprene stopper. 1905 Slim Tube Soil Water Samplers The 1905 slim tube soil water sampler is a small-diameter sampler designed for taking small-volume samples or for use where installation space is limited. 1922 "Ultra" Soil Water Samplers The 1922 "ultra" soil water sampler is used where samples are collected to detect concentrations of organic or inorganic solutes or pesticides, with sensitivities in parts per billion. 1923 Ultra Soil Water Sampler The large capacity 1923 ultra soil water sampler is used where samples are collected to detect concentrations of organic or inorganic solutes or pesticides, with sensitivities in parts per billion.
Tensiometers 2100F Micro Tensiometer and Soil Column Tensiometer The model 2100F tensiometer is a specialised unit designed for investigation of soil suction in small regimes such as near the soil surface, or for laboratory work such as measuring soil suction values at various levels in soil columns. The porous ceramic cup (0652X03-B01M1) is 6 mm in diameter and 2.5 cm long and attaches to the tensiometer body via a 1.8 m length of polyethylene tubing.