|
Print download and Links
Dewpoint Potential Meter References
|
American Society for Testing and Materials 2003, 'Standard test methods for determination of the soil water characteristic curve for desorption using a hanging column, pressure extractor, chilled mirror hygrometer, and/or centrifuge. Designation D 6836-02.', in 2003 Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia, PA.
Request Information
 
Abstract
|
|
Anderson, C.E. and Stormont, J.C. 2003, Laboratory Measurement of Soil Moisture at Capillary Potential Greater than 1500 kPa, Transportation Research Board Annual Meeting, Washington D.C.
Request Information
 
Abstract
|
|
Duniway, M.C., Herricka, J.E. and Monger, H.C. 2007, 'The High Water-Holding Capacity of Petrocalcic Horizons', Soil Science Society of America Journal, vol. 71, pp. 812-819.
Request Information
Abstract
|
|
Milczarek, M., van Zyl, D., Peng, S. and Rice, R. 2006, Saturated and Unsaturated Hydraulic Properties Characterization at Mine Facilities: Are We Doing It Right?, 7th International Conference on Acid Rock Drainage, St Louis, MO, USA,, American Society of Mining and Reclamation (AMSR). pp. 1273-1286.
Request Information
 
Abstract
|
|
Petry, T.M. and Jiang, C.-P. 2004, Final Project Report: Evaluation and Utilization of the WP4 Dewpoint Potentiameter Phase I & II, Decagon Devices
Request Information
Abstract
|
|
Sreedeep, S. and Singh, D.N. 2006, 'Nonlinear curve-fitting procedures for developing soil-water characteristic curves', Geotechnical Testing Journal, vol. 29, no. 5, pp.
Request Information
Abstract
|
|
Thakur, V.K.S., Sreedeep, S. and Singh, D.N. 2006, 'Laboratory investigations on extremely high suction measurements for fine-grained soils', Geotechnical and Geological Engineering, vol. 24, no. 3, pp. 565–578.
Request Information
Abstract
|
© 2003-2009, ICT International
EST NSW Australia
|