Feature Product
Tech Support
ICT Catalogue
Mailing List
Case Studies
Salinity
Tall Trees
Waste Water
Videos
2nd-hand Sales
Thursday November 20, 2008
Model 3000 Plant Water Status Console
Regulator
- Remove fitting marked "A" from Air Regulator, BOC Part No. 310354.
- Fit male ¼" NPT brass fitting in end of stainless steel hose, marked "C", into regulator where "A" was removed.
- Fit female ¼" NPT end of stainless steel hose to adaptor marked "B" which will be attached to inlet hose of Model 3000 or 3005 Plant Water Status Console.
Part included with Models 3000 & 3005 Series PWSC
Elbow fitting (37 degree body) Item No. 0772G42 (part B in photo)
Ordering information
Parts that must be ordered from ICT International to connect PWSC Models 3000 & 3005 to a BOC Gas Cylinder and Regulator
| BOC Air Regulator | Part No. 310354 |
| BOC Air Supply Hose (2 m) | Part No. G0751 |
| OR | |
| BOC Nitrogen Regulator | Part No. 310347 |
| BOC Nitrogen Supply Hose (2 m) | Part No. G0781 |
Please note: in Australia, fittings and connectors for Air & Nitrogen systems are not interchangeable. If you are using an Air cylinder, you must use fittings and connectors specifically for Air. If you are using a Nitrogen cylinder, you must use fittings and connectors specifically for Nitrogen.
Ordering information for a typical PWSC
| part no. | item | quantity |
|---|---|---|
| 3000-1412 | Plant Water Status Console | 1 |
| 3018G4K1 | Sealing Sleeve Kit | 1 |
| 3019K1 | Sealing Sleeve Kit | 2 |
| G0751 | BOC Air Supply Hose (2 m) | 1 |
| 310354 | BOC Air Regulator | 1 |
Complete G4 Grommet Kit (3019K3)
For more information about grommets, please see www.ictinternational.com/grommets.htm
© 2003-2008, ICT International