Feature Product
Tech Support
ICT Catalogue
Mailing List
Case Studies
Salinity
Tall Trees
Waste Water
Videos
2nd-hand Sales
Thursday July 24, 2008
ICT Irrigation Solutions
| Aquaterr Soil Moisture Meter. These are designed to closely track the "hand feel" method, using a radio-frequency capacitance sensor. A direct readout of % soil moisture saturation is given. |  |
|
|
|
Complete self-contained Soil Moisture probe and meter in a portable kit. |  |
| The 4–20 mA output interface has an analogue current loop output of 4–20 mA which can be used directly by industry-standard irrigation controllers and cabling power systems and hence is ideal for use in Parks and Gardens, Golf Courses and similar installations. |  |
|
| GT3-420 Tensiometer | The GT3-420 has an industry-standard 4 to 20mA current loop output that can be used to interface it to a wide variety of standard devices including programmable logic controllers (PLCs) and data loggers. |  |
| ECH2O EA-10 | The EA-10 sensor has a standard 2-wire, 4-20 mA analogue interface for use with industrial data acquisition and control systems. The EA-10 has a very low power requirement and high resolution. This gives you the ability to make as many measurements as you want over a long period of time (i.e. a growing season), with minimal battery usage. |  |
| Jet Fill Tensiometer 2725 | The Model 2725 Jet Fill Tensiometer features the patented Jet Fill reservoir for push-button convenience and minimization of soil disturbance. |  |
| ECH2O EC-5 Soil Moisture Sensors | ECH2O is a capacitance probe that measures dielectric permittivity of the surrounding medium. In soil, dielectric permittivity is directly related to the water content. The ECH2O probe outputs a voltage proportional to the dielectric permittivity, and therefore the water content of the soil. |  |
| ECH2O Starter Pack | The Starter Pack consists of five ECH2O (EC-20) sensors and one ECH2O Check hand-held display meter. This pack is designed to allow a grower to begin an irrigation scheduling program with only a small capital investment and allow further expansion over time as needed. |  |
| The Em50 is a 5-channel, self-contained data recorder designed for use with any ECH2O sensor. The sensors are plugged into the 5 channels and measured as directed by the user. Housed in a weatherproof enclosure with an O-ring seal, the Em50 is ideal for long-term outdoor use. With minimal battery usage, the Em50 can take readings as often as once per minute for over a year. |  |
|
| ProCheck hand-held readout device | The hand-held ProCheck gives you a read-out and stores reading from any of Decagon's soil moisture or environmental sensors. |  |
| ECH2O Logger System Em5 | The Em5 Logger system is a small battery-operated 5-channel analogue logger system available at low cost. The Em5B operates on 3xAAA batteries for up to six months and can store approximately 3400 readings. |  |
| ECH2O Logger Pack | The ECH2O Logger Pack consists of five EC-20 sensors, one ECH2O Em5 five-channel data logger and the M-Log scheduling software and all necessary cables. |  |
| ECH2O Check | Portable monitoring of your low-cost ECH2O probes has never been easier. Simply plug the connector from the probe into the ECH2O Check and push the button to get an instant reading of soil moisture. |  |
| Specifically designed to auger a tight-fitting hole when installing 50mm diameter aluminium access tubing as used with the Neutron Probe. |  |
|
| TIA-350S One-man Post Hole Digger | The Tia350S is an easy to start one-man lightweight post hole digger and sleeve for auger set. |
 |
Irrigation and Irrigation Scheduling Products
| Complete Irrigation Scheduling Systems | ||
|---|---|---|
| SoilStation | A Plug & Play logging system with a 250 sensor capacity. A complete solution for any soil moisture, soil suction, or multiparameter environmental monitoring project. | |
| EnviroStation | A complete Automatic Weather Station with automatic ET Calculation. Features Plug & Play functionality. A complete solution for weather and environmental monitoring. |  |
| Smart Loggers | A Plug & Play 250 sensor capacity smart Datalogger. |  |
| Irrigation Scheduling Software | ||
| NPro | NPro soil moisture software quickly converts measurements into management options in an easy, friendly, logical fashion. |  |
| Soil Tension & Suction | ||
| Jetfill Tensiometers | The Model 2725 Jet Fill Tensiometer features the patented Jet Fill reservoir for push-button convenience and minimization of soil disturbance when servicing is required. | |
| Transducer Tensiometers | The vacuum inside the tensiometer is measured by a pressure transducer, which gives a continuous analogue output signal. A resolution of 0.1 kPa (1 cm H2O) can be attained for the GT3 Tensiometer Transducer. |  |
| Transducers 0 to -7 kPa (GT3-1) | ||
| Transducers 0 to -100 kPa (GT3-15) | ||
| Transducers -100 to 200 kPa (GT3-30) | ||
| Gypsum Blocks | Gypsum blocks provide quick response and true sensitivity to conditions where moisture remains relatively high. |  |
| Thermal Matric Sensor | The thermal matric sensor TM229-SMM is used to measure the soil matric potential in dry to very dry soils. Typical applications are in the area of store release cover hydrology monitoring in mine and landfill closure and research on desert vegetation and hydrology. |  |
| Capacitance Soil Moisture Probes | ||
| ECH2O | ECH2O is a capacitance probe that measures dielectric permittivity of the surrounding medium. In soil, dielectric permittivity is directly related to the water content. |  |
| ECH2O - Smart Output | ||
| ECH2O - 4-20 mA Output | ||
| Aquaterr M-300 Soil Moisture Meter | Join the many users who have discovered the benefits of "seeing" water distribution patterns in the soil. Those who have battled problem plants and tricky soil areas greatly appreciate the Moisture Meter's ability to help solve these problems. Aquaterr Instruments’ portable capacitance-based probes provide instant direct readings in a stainless steel and aluminum housing that will last for years. | |
| Aquaterr T-300 Temperature and Soil Moisture Meter | ||
| Aquaterr EC-300 Salinity, Temperature and Soil Moisture Meter | ||
| Standing Wave Soil Moisture Probes | ||
| MP406 - Analogue Output | The MP406 can be used to measure the soil moisture for scientific research or irrigation management. | |
| MP406 - Smart Output | ||
| MP406 - 4-20 mA Output | ||
| MPKit | The MPKit enables rapid sampling of Volumetric Soil Water Content (VSW%). The MP406 is inserted to the required depth of measurement and the VSW% is read out on the display of the MPM160 meter. |  |
| Neutron Probe Soil Moisture Meters | ||
| 503DR Neutron Probe | CPN 503DR-1.5 Neutron Probe sets the standards for soil moisture measurement for both scientific research and irrigation scheduling. Readings of soil water content recorded in the Neutron Probe can be automatically uploaded to computer for review and analysis. ICT International provides scientists and irrigation farmers with a full and comprehensive neutron probe service. |
 |
| 503DR Neutron Probe - Second Hand | ||
| 503DR Neutron Probe Irrigation Scheduling Package | ||
| 503DR Neutron Probe Repair Service | ||
| Radiation Safety Training | ||
| Neutron Probe Disposal Service | ||
| Soil Salinity Measurement | ||
| Soil Salinity Sensor | Soil salinity sensors are ideal for efficient in-situ field monitoring of soil salinity with minimal disturbance to the soil profile. At a selected depth, sensors can monitor salinity with high accuracy over a long period. The soil salinity sensors are also suitable for use with soil columns in the laboratory. |  |
| Hand Held Salinity Sensor Smart Reader | A new Salinity Meter manufactured by ICT International offers scientists and environmental managers a highly accurate, low cost, plug and play solution to measure salinity in the field. The system consists of a meter with LCD display and spreadsheet software. The Software allows conversion of the manually recorded values to soil salinity in dS/m for each individual soil salinity sensor |  |
| Soil Samplers & Augers | ||
| Soil Samplers | The Model 0200 Soil Bulk Density Sampler allows the extraction of intact soil cores. A core 57mm (2.25") in diameter is extracted and held in a brass cylinder. The cylinder and soil sample can then be placed in a pressure plate extractor or Tempe Cell apparatus, and the water-holding characteristics of the sample can be determined. |  |
| Soil Augers | Specifically designed to auger a tight-fitting hole when installing 50 mm outside diameter aluminium access tubing used with the Neutron Probe. Set includes a spiral auger for clay soils, a shell auger for sandy or dry clay soils, extension and T-handle. Holes can be augered for 2 m aluminium tubes. | |
| TIA-350S One-man Post Hole Digger | The Tia350S is an easy to start one-man lightweight post hole digger and sleeve for auger set. |
|
© 2003-2008, ICT International