Request Quote | Specification sheets and Links

5TE Sensor

The 5TE is designed to measure the water content, electrical conductivity, and temperature of soil and growing media. Using an oscillator running at 70 MHz, it measures the dielectric permittivity of soil to determine the water content. A thermistor in thermal contact with the probe prongs provides the soil temperature, while the screws on the surface of the sensor form a two-probe electrical array to measure electrical conductivity.

5TE Soil Moisture Sensor Applications:

Soil salinity monitoring

Features:

The 5TE utilizes a 5 point dielectric calibration to provide dielectric permittivity measurements

Notes:

It is important to avoid air gaps or extremely compact soil around the probe

Specifications
Range:	Volumetric water content:	1 (air) to 80 (water) Apparent Dielectric Permittivity
	Electrical Conductivity (bulk):	0 to 23 dS/m (bulk)
	Temperature:	-40 to 50 °C
Resolution:	Volumetric water content:	0 to 50% VWC
	Electrical Conductivity (bulk):	0.01 dS/m from 0 to 7 dS/m, 0.05 dS/m from 7 to 23 dS/m
	Temperature:	0.1 °C
Power:	3-16 VDC
Output:	Digital 12-bit
Measurement Time:	10 ms
Cable Length:	5 m
Temperature:	-40°C to +50°C
Dimensions:	14.5 cm x 3.3 cm x 0.7 cm
Connecor Types:	3.5 mm "stereo" plug or stripped and tinned lead wires (3)
Datalogger Compatibility:	Em50, ProCheck

Links and Brochures
Download a printer-friendly version of 5TE Soil Moisture Sensor information
Download a printer-friendly version of 5TE Soil Moisture Sensor manual
Commercial-grade Data Logger System Em50 page
ProCheck hand-held readout device page
Soil Science Instrumentation page
Decagon Products Directory

EST NSW Australia